Make Sure Your Home Is Prepared for Winter Have Your Rain Gutters Cleaned

By on November 6, 2017

Gutter improvements

Since fall is here and winter is just around the corner, it’s probably time to have your rain gutters inspected. If your gutters are clogged with leaves or other types of debris, they won’t be able to perform their job. So, if you haven’t had your gutters and downspouts cleaned within the past six months or even longer, now’s definitely the time.

A gutter cleaning and repair service will tell you that this is an important job and should be done at least twice a year. Even if it only rains an inch here and there. this can add up to 1,900 gallons of water that needs to be drained from your roof. If your gutters need cleaning, repairing, or replacing, there’s a good chance that once it rains, you’ll have quite a bit of standing water on your roof.

In the event that you need to replace gutters, you may be interested in a few details about different types of gutters. Most of the gutters that are used for homes are five or six inches, and are a standard K-style. In addition to having twice the capacity of their same-sized, half-round counterparts, K-style gutters also cost up to 50% more per linear foot. Even though they do cost more, you’ll be happy to know that your K-style gutters have twice the capacity during stormy weather.

When you purchase a five-inch K-style residential gutter system, it will usually come with two-times-three- inch downspouts. If you need a larger system, however, this would usually be a six-inch K-style gutter that requires a three-times-four-inch downspout.

While downspouts can be round or square with widths of three to six inches, rectangular downspouts that are two inches by three inches, or three inches by four inches, are more commonly used. It’s important to note that a downspout will be needed for every 30 to 40 linear feet of your gutter. If you want to increase your gutter system’s capacity, then all you need to do is add more downspouts.

Rain gutters are made out of different materials. The same is true of K-Style gutters, which are made out of the following materials:

Aluminum gutters
  • Copper gutters
  • Steel gutters<.li>
  • Vinyl gutters
  • Zinc gutters
  • If you need gutter replacement, you may want to consider either copper or steel gutters. This is because when properly maintained, they will last longer than their counterparts. While galvanized steel gutters will have up to a 20-year lifespan, copper gutters may have a 100-year lifespan.

    Another benefit of copper gutters is that they don’t rust and will never need painting. When you replace gutters with copper gutters, they can handle any climate. They will also oxidize to a matte brown in a few months, and will turn a beautiful blue-green as the decades pass.

    Whether you need to replace gutters or have them cleaned or repaired, it’s a good idea to contact a local house gutter cleaning and repair service at your earliest convenience. When this service comes to your home to inspect, clean, and possibly repair your gutters, you can ask them for more information on the benefits of K-style copper gutters. If you also have a deck in your front or back yard, you can also ask for information on their deck cleaning services.

    About DIY Home Ideas

    You must be logged in to post a comment Login

    Leave a Reply